Why is the screen blank on my Brother Label Maker?
If the display on your Brother Label Maker remains blank after turning it on, check that the batteries are correctly installed and that the AC adapter (designed exclusively for your device) is properly connected. Also, ensure that the rechargeable Li-ion battery is fully charged.
Why does my Brother P-touch E550W Label Maker say 'Tape Cassette Changed!'?
If your Brother Label Maker displays 'Tape Cassette Changed!', it means that the tape cassette selected for printing is different from the tape cassette installed in the P-touch. Unfortunately, the provided information does not offer a specific solution beyond this.
How to fix a Brother Printer when the screen 'locks' or doesn't respond?
If your Brother Printer screen 'locks' or doesn't respond normally, reset the internal memory to the initial settings. If resetting doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
Why does my Brother P-touch E550W Label Maker say 'Insert HS 17.7mm Tube Cassette!'?
If your Brother Label Maker displays 'Insert HS 17.7mm Tube Cassette!', it means a 17.7 mm Heat Shrink Tube is not installed when Template for 17.7 mm Heat Shrink Tube is selected. Install a 17.7 mm Heat Shrink Tube.
Why does my Brother Label Maker say 'Maximum Of 5 Bar Codes Per Label!'?
If your Brother Label Maker displays 'Maximum Of 5 Bar Codes Per Label!', it means there are already five bar codes entered in the text data when you try to enter a new bar code. You can only use up to five bar codes in each label.
What does 'Tape Width Limit! Max 3 Lines' mean on my Brother P-touch E550W Label Maker?
If your Brother Label Maker displays 'Tape Width Limit! Max 3 Lines', it means there are more than three lines of text when you press the Print or Preview key while using 12 mm tape. Limit the number of lines to three, or replace with a larger width tape cassette.
Why does my Brother Label Maker say 'Insert 3.5mm Tape Cassette!'?
If your Brother Label Maker displays 'Insert 3.5mm Tape Cassette!', it means a 3.5 mm tape cassette is not installed when Template or Block Layouts for 3.5 mm tape is selected. Install a 3.5 mm tape cassette.
Why is my Brother Printer label not cut automatically?
Check the Cut Option setting. Alternatively, press the Feed & Cut key to feed and cut the tape.
What to do if my Brother Printer label is not printed after pressing the Print key?
If your Brother Printer isn't printing labels after pressing the Print key, ensure that you've entered text and that the tape cassette is correctly installed with enough tape. If the tape is bent, cut off the bent section and thread it through the Tape Exit Slot. If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Make sure the end of the tape passes through the tape guide before reinstalling the cassette.
Why is my Brother P-touch E550W Label Maker not cutting automatically?
If your Brother Label Maker isn't cutting labels automatically, verify the Cut Option setting. You can also press the feed and cut key to manually cut the tape.
Instructions for connecting AC adapter and installing batteries.
Choose from six types of label formats for specific uses.
Methods for adding, modifying, and deleting text on labels.
Save frequently used label designs to the printer's internal memory.
Recall and display previously saved label files from memory.
Design and print custom labels using Brother's software.
Launch P-touch Editor on Windows operating systems.
Manage and transfer templates and data between computer and printer.
Steps for sending templates and other data from PC to the printer.
Print labels using templates or data sent from a computer.
Print and manage templates or other data using the library application.
Steps to set up wireless network communication for the printer.
Restore printer settings to factory defaults or clear specific data.
Solutions for common printer problems and error conditions.
Explanation of error codes and how to resolve them.
General| Print Technology | Thermal transfer |
|---|---|
| Maximum Tape Width | 24 mm |
| Connectivity | Wi-Fi, USB |
| Display | LCD |
| Keyboard | QWERTY |
| Print Resolution | 180 dpi |
| Print Speed | 30 mm/sec |
| Label Width | 3.5 mm - 24 mm |
| Power Source | AC Adapter |
| Cutter | Automatic |
| Weight | 1.05 kg |
To Next Page
