What to do if my Brother Printer displays 'Memory Full!'?
If your Brother Printer displays 'Memory Full!' when trying to save a label file, it means there isn't enough internal memory available. Delete any unnecessary files to free up memory for the new label file.
What to do if my Brother Label Maker stops during printing?
If your Brother Label Maker stops while printing, replace the tape cassette if you see striped tape, as this indicates the end of the tape. Alternatively, replace all batteries or connect the AC adapter directly to the Label Maker.
How to disable cut confirmation message on Brother Label Maker?
The message appears because cut labels must not remain in the tape exit slot. To disable this message on your Brother Label Maker, press the key, then select 'Cut Option' using the key, and press the key. Next, select 'No Cut' using the key, and press the key.
What to do if my Brother Printer stops while printing a label?
If your Brother Printer stops while printing, it might be due to the tape. If you see striped tape, this means you've reached the end of the tape, so replace the tape cassette. Alternatively, the batteries may be low; replace them or connect the AC adapter directly to the printer.
Why is my Brother Printer label not printed correctly?
If your Brother Printer label isn't printing correctly, try removing the tape cassette and reinstalling it, pressing firmly until it clicks. Also, if the Print Head is dirty, clean it using a cotton swab or the optional Print Head cleaning cassette (TZe-CL4).
How to fix a Brother Printer when the screen 'locks' or doesn't respond?
If your Brother Printer screen 'locks' or doesn't respond normally, reset the internal memory to the initial settings. If resetting doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if my Brother Printer display remains blank after turning on the power?
If the display of your Brother Printer remains blank after turning it on, check that the batteries are correctly installed and that the AC adapter designed exclusively for your printer is correctly connected. Also, ensure that the rechargeable Li-ion battery is fully charged.
Why is the screen blank on my Brother Label Maker?
If the display on your Brother Label Maker remains blank after turning it on, check that the batteries are correctly installed and that the AC adapter (designed exclusively for your device) is properly connected. Also, ensure that the rechargeable Li-ion battery is fully charged.
How to unlock Brother P-touch E550W?
If the screen on your Brother Label Maker 'locks' or becomes unresponsive, reset the internal memory to its initial settings. If resetting doesn't resolve the issue, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if Brother P-touch E550W Label Maker is not printing?
If your Brother Label Maker isn't printing after pressing the print key, first ensure that you've entered text. Next, check that the tape cassette is correctly installed and contains sufficient tape. If the tape is bent, cut off the damaged section and thread it through the exit slot. If a jam occurs, remove the cassette, carefully extract the jammed tape, and trim it. Finally, ensure the tape's end passes through the guide before reinstalling the cassette.
Instructions for connecting AC adapter and installing batteries.
Choose from six types of label formats for specific uses.
Methods for adding, modifying, and deleting text on labels.
Save frequently used label designs to the printer's internal memory.
Recall and display previously saved label files from memory.
Design and print custom labels using Brother's software.
Launch P-touch Editor on Windows operating systems.
Manage and transfer templates and data between computer and printer.
Steps for sending templates and other data from PC to the printer.
Print labels using templates or data sent from a computer.
Print and manage templates or other data using the library application.
Steps to set up wireless network communication for the printer.
Restore printer settings to factory defaults or clear specific data.
Solutions for common printer problems and error conditions.
Explanation of error codes and how to resolve them.
General| Print Technology | Thermal transfer |
|---|---|
| Maximum Tape Width | 24 mm |
| Connectivity | Wi-Fi, USB |
| Display | LCD |
| Keyboard | QWERTY |
| Print Resolution | 180 dpi |
| Print Speed | 30 mm/sec |
| Label Width | 3.5 mm - 24 mm |
| Power Source | AC Adapter |
| Cutter | Automatic |
| Weight | 1.05 kg |
To Next Page
