118
FUEL SYSTEM
INTAKE MANIFOLD SERVICE
INTAKE MANIFOLD
SERVICE
Removal
Remove recoil starter (rope start models). Refer to
starter REMOVAL on p. 219.
Remove flywheel cover (electric start models).
Refer to ignition COMPONENT SERVICING on
p. 99.
Remove the carburetor assembly. Refer to CAR-
BURETOR SERVICE on p. 109.
Remove the fuel filter from filter bracket. Remove
two screws securing rectifier/regulator. Disconnect
rectifier lead wire connectors.
Remove screw, throttle drum (with throttle cables),
and throttle cam. Remove two screws and cable
bracket.
Remove six screws and intake manifold.
1. Fuel filter
2. Rectifier
3. Rectifier screws
005364
2
3
3
1
1. Throttle drum screw
2. Cable bracket screws
005635
005636
2
1
To Next Page
Loading...
