121
FUEL SYSTEM
THROTTLE CONTROL
6
Remote Models
Install two throttle cable 1 · 2 to throttle drum 3,
interlink throttle lever 4 and each cable brackets
5.
Align the match mark b (–) on interlink throttle
lever 4 with the cylinder block rib C and hold this
position.
Align the match mark a on the throttle cam 6
with the center of throttle lever roller 7, then hold
this condition unmoved and turn the cable lock
nuts 8 so as to removed play on inner cables.
Tighten the lock nuts securely.
To Next Page
Loading...
