BRUEL & KJAER 2525 - Page 87

Measuring Ampifier Type 2525
User Manual Vol.2
6–29
BE1394– 11
Chapter 6 – Set-up and Display (Results) Messages
Mounted Impulse/Resonance Frequency Commands
6.9.2 Mounted_Resonance_Frequency?
The syntax for this stand-alone query is shown in Fig.6.48.
The value returned by the amplifier represents the current measured resonance
frequency of an accelerometer attached to a test piece and excited with the impulse
frequency specified in Mounted_Impulse_Frequency (see Volume 1, Chapter 4) and
has values as follows:
Range: 3E+03 to 60E+03 Hz
Resolution: 10 Hz within 3E+03 to 10E+03 Hz
100 Hz within 10E+03 to 60E+03 Hz
Fig.6.48 The syntax for the query Mounted_Resonance_Frequency? and amplifier response
941135e
Te
CHANNEL_1
CHANNEL_1
MOUNTED_RESONANCE_FREQUENCY?
To 2525
:
Header OFf
Te
From 2525
: :
Value
NR
SP
—
:
MOUNTED_RESONANCE_FREQUENCY