Bruker BioSpin minispec mq10 User Manual

Introduction
32 E1400011_1_001
Replace the assembly by following the instructions in reversed order.
Intelligent probes were developed for the minispec mq-Series. When you exchange a probe,
the software will read the most important parameters (pulse length, resonance frequency)
from the probe itself. The software will prompt the user to confirm the settings. After
temperature stabilization it is recommended to run the Daily Check procedure. In certain
cases a fine tuning by running Update Settings (see The minispec Menu [}46]) is beneficial.

Bruker BioSpin minispec mq10 Specifications

General

Brand	Bruker BioSpin
Model	minispec mq10
Category	Measuring Instruments
Language	English