A. Factory Acceptance Test Protocol
DOC-M88-EXX157_V17_04.2019 21 / 96
A. Factory Acceptance Test
Protocol
Declaration of Conformity
Bragg-Brentano Geometry with Copper Anode
Sample:
NIST SRM1976c
Anode:
Cu
Customer Name:
Customer PO Number:
Serial Number: SAP Number (Sales Order Number):
This protocol details the results of the factory acceptance test procedure for Bruker AXS dif-
fraction systems in Bragg-Brentano reflection geometry. The factory acceptance test proce-
dure consists in full-profile measurements of the certified NIST standard reference material
SRM1976c. Details of this procedure are outlined in the Instrument Verification Booklet,
which is part of the instrument documentation.
The present verification routine covers the functionality of all relevant components of the dif-
fraction system under investigation.
System within required specifications
YES
NO
Tested by:
Name, first name:
Testing approval: I, an authorized Bruker Employee, acknowledge that the above
referenced system has been tested and demonstrates functionality that meets
customer order specifications in accordance with mutually agreed terms.
Date: Signature:
Test Supervisor:
Name, first name:
Date: Signature:
To Next Page
Loading...
Need help?
General
