Bruker D8 Series User Manual

F. Customer Acceptance Test Protocol
DOC-M88-EXX157_V17_04.2019 67 / 96
F. Customer Acceptance Test
Protocol
Declaration of Conformity
Bragg-Brentano Geometry with Cobalt Anode
Sample:
NIST SRM1976c
Anode:
Co
Customer Name:
Customer PO Number:
Serial Number: SAP Number (Sales Order Number):
This protocol details the results of the factory acceptance test procedure for Bruker AXS dif-
fraction systems in Bragg-Brentano reflection geometry. The factory acceptance test proce-
dure consists in full-profile measurements of the certified NIST standard reference material
SRM1976c. Details of this procedure are outlined in the Instrument Verification Booklet,
which is part of the instrument documentation.
The present verification routine covers the functionality of all relevant components of the dif-
fraction system under investigation.
System within required specifications
YES
NO
Customer Name:
Date: Signature:
Technician Name:
Date: Signature:

Bruker D8 Series Specifications

General

Manufacturer	Bruker
Series	D8
X-ray Source	Sealed tube or rotating anode
Goniometer	Various types available, including θ/θ, θ/2θ, and vertical goniometers
Sample Stage	Various options including XYZ stages and sample changers
Software	DIFFRAC.SUITE