Bruker D8 Series User Manual

C. Factory Acceptance Test Protocol
DOC-M88-EXX157_V17_04.2019 45 / 96
Instrument Configuration D8 DISCOVER
Instrument Details Set Values for Validation
Diffractome-
ter
D8 DISCOVER Tube Power: 40kV/40mA (for FL tubes)
Tube Power: 40kV/ 30mA (for FF tubes)
TXS Power: 50kV/100mA (for 0.3x3mm
2
filament, line and spot focus)
TXS Power: 50kV/22mA (for 0.1x1mm
2
filament, spot focus)
Vertical
goniometer
Theta/Theta
Theta/2Theta
Height:
150
214
258
Radius:
Primary radius
Secondary radius
....................[mm]
....................[mm]
Horizontal
goniometer
Theta/2Theta
Height:
214
258
Radius:
Primary radius
Secondary radius
....................[mm]
....................[mm]
Sample stage Standard
Rotating
FLIP-STICK Sample position 5
AUTO CHANGER Sample position A1
Compact Cradle/ Compact Cradle
Plus
Centric Eulerian Cradle
UMC 150/151/1516/150 HTC
Compact UMC
Monochro-
matisation
Primary Göbel mirror 60 mm Exit slit 1.2mm
Primary TWIN / TRIO parallel beam Exit slit 1 mm
Discriminator Settings
(LYNXEYE XE/ LYNXEYEXE‑T)
Copy values from High Resolution mode:
Low Thr. [V] High Thr. [V] Veto Thr. [V]

Bruker D8 Series Specifications

General

Manufacturer	Bruker
Series	D8
X-ray Source	Sealed tube or rotating anode
Goniometer	Various types available, including θ/θ, θ/2θ, and vertical goniometers
Sample Stage	Various options including XYZ stages and sample changers
Software	DIFFRAC.SUITE