EasyManua.ls Logo

BTECH GMRS-V2 - Keypad and PTT Operations

BTECH GMRS-V2
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
holding down the PTT.
Side Key 2 [M]
Press [M] momentarily to turn on the LED flashlight. Another momentary press will flash the
LED. Another momentary press turns the flashlight off.
Press and hold [M] to monitor the signal. This will open the squelch so you can listen to the
unfiltered signal.
VFO / MR – How to Switch Modes
To switch your radio to Frequency (VFO) mode; you turn the radio OFF, then Press and Hold
button while powering ON.
To save frequencies to a channel memory you must be in Frequency (VFO) mode.
Dual Push-To-Talk
The GMRS-V2 includes a Dual PTT Key/ Rocker Switch. You can communicate with other parties
effortlessly by pressing the PTT rocker key upwards to transmit on Channel A (the upper
display), or by pressing the PTT rocker key downwards to transmit on Channel B (the lower
display).

Table of Contents

Other manuals for BTECH GMRS-V2

Related product manuals