VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
momentarily press to change between High and Low transmit power. Do note that this does
not alter the transmit power stored to memory for that channel; it only affects the current session.
Switching to another channel or another operating mode (including broadcast FM) will reset
transmit power to what's stored in channel memory.
Keypad Lock/ High-Low Transmit Power
The BTECH GMRS-V2 features a keypad lock that locks out all keys except for the three side
keys.
To enable or disable the keypad lock, press and hold the key for about two seconds.
This key will also select High or Low TX power on a quick press.
Star * Key
A short momentary press of the key enables the reverse function (switching the receive
and transmit frequencies on repeater operation). An “R” will appear at the top of the display.
When listening to broadcast FM a momentary press will start the scanning. Scanning in
broadcast FM will stop as soon as an active station is found, regardless of scanner resume
method.
To enable the scanner, press and hold the key for about two seconds. See Chapter 6,
Scanning for details.
To Next Page
Loading...
