VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Using Shortcuts
As shown in “Appendix B, Menu Definitions”, each menu item has an associated numerical
value. These can be used for direct access to a menu item.
The menu is also organized in such a way that the ten most common functions are on top, and
as can be seen in Figure 2.3, “BTECH GMRS-V2, keypad”, these are also printed on the keypad so
you don't have to remember them all. The parameters also have a number associated with
them, see Appendix B, Menu definitions for details.
Procedure 5.2. Using the menu with shortcuts
1. Press the key to enter the menu.
2. Use the numerical keypad to enter the number of the menu item.
3. To enter the menu item, press the key.
4. For entering the desired parameter, you have two options:
a. Use the arrow keys as we did in the previous section; or
b. Use the numerical keypad to enter the numerical shortcut code.
5. And just as in the previous section;
To confirm your selection, press and it will save your setting and bring you
back to the main menu.
6. All further examples and procedures in this manual will use the numerical menu short
cuts.
To Next Page
Loading...
