VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Chapter 7. - Dual Watch
In certain situations, the ability to monitor two channels at once can be a valuable asset. The
BTECH GMRS-V2 features Dual Watch functionality (single receiver) with the ability to lock the
transmit frequency to one of the two channels it monitors.
Procedure 7.1. With Dual Push-to-Talk Enabled (Default)
1. The Dual Push-to-Talk Switch is a Rocker Switch with upper and lower buttons. You can
use Menu 42 (See Appendix B) to adjust audible alerts for Received Transmissions.
2. To Transmit on the Upper Frequency (VFO A) – Press upwards on the Dual PTT Button
3. To Transmit on the Lower Frequency (VFO B) – Press downwards on the Dual PTT Button
Procedure 7.2. With Single Push-to-Talk Enabled
1. Select the option to synchronize the push-to-talk button, then upload the new settings
to the radio via software (or see Menu 33 - See Chapter 9 “Single or Dual PTT”)
2. Press the key to select between the upper (VFO A) or lower (VFO B) frequency.
3. An arrow will display next to the frequency that you have selected as your default
transmitting channel.
4. Press the Push-to-Talk (either direction) to transmit on the selected frequency
To Next Page
Loading...
