BTECH GMRS-V2 - Adding GMRS Channels; Adding a NOAA Channel

56
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-V2!
!
!
!
Adding GMRS Channels
1. Press the key to enter the menu.
2. Enter on the numerical keypad to get to GCH-AD.
3. Press to select.
4. Use the and keys to select an empty memory channel, or enter it directly on
the numerical keypad.
5. Press the key to confirm
6. Display will show “GMRS _ _” at which point you enter the GMRS channel number (for
example 02 for GMRS02). (Refer to GMRS Channel Chart in Chapter 4)
7. Press the key to confirm.
8. Press the key to exit the menu.
Adding a NOAA Channel
The following steps assume that you're in Frequency (VFO) mode (see above) and that you've
entered the NOAA frequency to store to memory.
1. Press the key to enter the menu.
2. Enter on the numerical keypad to get to NCH-AD.