VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
6. Press to exit the menu.
To change the time the backlight stays on for your LCD, follow these steps:
Procedure 10.2. Setting backlight time-out
1. Press the key to enter the menu.
2. Enter on your numeric keypad to access the setting for backlight time out.
3. Press key to select.
4. Use the and keys to pick the desired time-out for the display.
5. Press to confirm and save.
6. Press to exit the menu.
For details see the section called “29 WT-LED - Display backlight color, Standby” in Appendix B,
Menu definitions.
Single or Dual PTT
Dual PTT Synchronization
The GMRS-V2 comes with the Dual PTT key enabled, but the GMRS-V2 Menu has a Menu option
that allows locking the Dual PTT Button to simulate a Single PTT and override the Dual PTT
feature. By Pressing the EXIT/AB button, you can still switch the selected upper/lower display.
To Next Page
Loading...
