VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Tone-Burst
To send out a tone-burst (selectable by MENU 40); press the [F] key while holding down the PTT.
No further configuration is required using this feature.
You can select from 1000, 1450, 1750, or 2100Hz Tone Burst Options. These options are found
on Menu 40.
Procedure 9.3. Tone Burst setup how-to
1. Press the key to enter the menu.
2. Enter on the numeric keypad to get to R-TONE.
3. Press to select.
4. Enter desired Tone Burst Option on the numeric keypad.
a. 1000 HZ [0] - 1450 HZ [1] - 1750 HZ [2] - 2100 HZ [3]
5. Press to confirm and save.
6. Press to exit the menu system.
If you have the keypad lock enabled on your radio, you can still send a tone burst without
having to unlock your radio. (Press the “F” key while holding down the PTT)
To Next Page
Loading...
