btsr SMART MATRIX FEEDER - I;O Signal Check

I/O Signal Check
SMART MATRIX FEEDER 2-25
I/O Signal Check
This function allows you to check the status of I/O signals (PRX, ZPX and STC).
This is particularly useful during the installation stage, to confirm the correct operation of the interface
signals.
Enter the SETUP menu.
Select SERVICE.
Select I/O CHECK.
ACTIVE = active signal
IDLE = inactive signal
To leave the function.
BACK to return to the previous screen, EXIT to return to
main menu.
SETUP
→
SERVICE
→
I/O CHECK