Cross Reference Table between Ultrafeeder and Smart Matrix Feeder Parameters
SMART MATRIX FEEDER 3.4
Cross Reference Table between Ultrafeeder and Smart Matrix
Feeder Parameters
[SEAMLESS, SOCKS, PANTYHOSE, JERSEY KNIT e JACQUARD KNIT applications]
ULTRAFEEDER parameters
SMART MATRIX FEEDER
parameters
Possible values Window
Level
ADVANCED
PROGR. Parameter
[STYLE EDIT] Menu
P1.1
P1.2
P1.3
P1.4
WORK TENSION
TENSION ERROR
TIME ALARM
INC-DEC TENSION
WORK TENS P1
TENSION ERR
TIME ALARM
INC-DEC TENS
[0.2 – 99.5 gr]
[0.1 – 99.5 gr, AUTO]
[0.1 – 25 sec., OFF, AUTO]
[0.1 – 25 gr.]
STD
ADV
ADV
STD
P2.1
P2.2
P2.3
EXIT TENSION
RELAX YARN
RELAX SPEED
WORK TENS P2
RELAX YARN
RELAX SPEED
[0.2 – 99.5 gr , OFF]
[0.2 – 99.5 revs]
[0 – 10, OFF]
STD
ADV
ADV
P3.1
P3.2
P3.3
P3.4
OFFSET AUTO
MOTOR CALIBRA
ACCESS CODE
FEEDER CODE
AUTO OFFSET
--
--
--
[ACTIVATED, DEACTIVATED]
--
--
--
ADV
--
--
--
P4.1
P4.2
P4.3
P4.4
P4.4
P4.6
LANGUAGE
APPLICATION
YARN TYPE
I-DEC NO
STOP NO
MODE
Menu [SERVICE-LANGUAGE]
APPLICATION
YARN TYPE
INC/DEC INPUT
STOP OUTPUT
SYNC. UF #N (*)
[ITALIAN, ENGLISH, ETC]
Application name
[ALL YARN, ELASTIC]
[NO, NC]
[NO, NC]
[OFF, MASTER1, MASTER2]
ADV
ADV
ADV
ADV
LFATOL
--
--
--
--
--
--
P4.5
STANDARD, ADVANCED
--
--
--
--
--
UNICO
EDITOR
EDITOR LOCK
PK OUT TIME (ms) (**)
PK OUT ALARM (ms) (**)
PK IN TIME (ms) (***)
PK IN ALARM (ms) (***)
UNICO
[STANDARD, ADVACED]
[ACTIVATED, DEACTIVATED]
[1 – 250, OFF]
[1 – 500]
[1 – 250, OFF]
[1 – 100]
[AUTOMODE, OFF]
STD
STD
ADV
ADV
ADV
ADV
ADV
For detailed information about errors and possible solutions, please refer to the Ultrafeeder
manual.
(*) The SYNC. UF#N parameter allows you to set the first ULTRAFEEDER device as MASTER 1, MASTER
2 or OFF (neither MASTER 1 nor MASTER 2). The option set on this parameter will be indicated on the
LFA window of ROLLING FEEDER devices.
To Next Page
Loading...