Introduzione
SMART MATRIX FEEDER - ii -
Symbols Used
This symbol is used to point-out notes, warnings and other important information.
In the program function descriptions, this symbol indicates the function
(e.g. IDENTIFY) within the menu item (SETUP).
The graphic symbol of ULTRAFEEDER
device, ROLLING FEEDER device or UNIFEEDER
device, shown on the page header, indicates that the relevant function applies exclusively to the indicated device
type.
Reference Documentation
For detailed information about the operation, interface and local programming mode of ULTRAFEEDER
Yarn Feeding Devices, please refer to the ULTRAFEEDER Operating Manual.
For detailed information about the operation, interface and local programming mode of ROLLING FEEDER
Yarn Feeding Devices, please refer to the ROLLING FEEDER/ROLLING MED Operating Manual.
For detailed information about the operation, interface and local programming mode of UNIFEEDER Yarn
Feeding Devices, please refer to the UNIFEEDER Operating Manual.
SETUP
→
IDENTIFY
To Next Page
Loading...