Logamatic EMS – 6 720 801 386 2011/05
15
Principles of operation
4
4.5 Changing the room temperature permanently
NOTE: System damage through frost!
If room temperatures are set below 10 °C, rooms may cool down so much that pipes in
external walls (for example) may freeze in cold weather.
B Set room temperatures higher than 10 °C.
Operation Result
1. Changing the day room temperature: Hold the button
pressed down and simultaneously turn the rotary selector.
2. Changing the night room temperature
1)
: Hold the button
pressed down and simultaneously turn the rotary
selector.
1) If “shut-down mode” is selected as the night setback mode, the heating system will be switched off at night.
A night time room temperature cannot be set. The display will show a message to this effect.
3. We recommend activating automatic mode. Automatic mode
ensures automatic switchover between day and night mode
(night setback).
Press .
Automatic mode is now active with the modified room temperatures. The LED next to the
button lights up. The standard display reappears.
Table 6 Changing the room temperature permanently
SET ROOM TEMPERATURE
Room temperature
setting for daytime
operation.
SET ROOM TEMPERATURE
Room temperature
setting for nighttime
operation.
Automatic operation
selected.
Change between:
day:
night:
To Next Page
Loading...
