Buderus Logamatic EMS RC35 User Manual

Getting started
Logamatic EMS – 6 720 801 386 2011/05
8
2
2 Getting started
Initial situation: the flap is closed.
What do I do ... Operation Display/result
if it is temporarily
too cool/warm on
this day throughout
the whole home?
B Turn rotary selector.
The current room temperature setting
starts flashing.
B Set the desired room temperature with
the rotary selector.
B Let go of the rotary selector.
The modified room temperature is saved
(and stops flashing).
The standard display reappears.
In automatic mode, the modified room
temperature remains active until the next
changeover between night/day mode.
if it is permanently
too cool/warm in the
entire home?
Æ Changing room
temperature and
activating automatic
mode.
B Changing the day room temperature:
Hold the button pressed down and
simultaneously turn the rotary
selector.
B Changing the night room temperature:
Hold the button pressed down and
simultaneously turn the rotary
selector.
1)
B We recommend activating automatic
mode:
Press button.
The modified room temperatures are
saved. The LED next to the button
lights up.
Table 2 Getting started – room temperatures
SET ROOM TEMPERATURE
Until next switch
point, room temp.
changed to:
SET ROOM TEMPERATURE
Room temperature
setting for daytime
operation.
Automatic operation
selected.
Change between:
day:
night:

Buderus Logamatic EMS RC35 Specifications

General

Brand	Buderus
Model	Logamatic EMS RC35
Category	Controller
Language	English