Buderus Logamatic EMS RC35 User Manual

Overview of controls
Logamatic EMS – 6 720 801 386 2011/05
2
Overview of controls
Key to diagram:
1 Flap; pull the recessed grip on the
left to open
2 Display
3 Rotary selector for changing values
and temperatures or for moving
within the menus
4 Keys for basic functions: When the LED lights up,
“AUT” (automatic) • the switching program is active (automatic changeover between
day and night room temperatures).
“Day mode” (manual) • the heating system operates at the set day room temperature.
The DHW is switched on (basic setting).
“Night mode” (manual) • the heating system operates at the set night room temperature.
Frost protection is active.
DHW heating is off (default setting).
“DHW” • the DHW temperature has fallen below its set value. The DHW
can be reheated by pressing the button (the LED will then flash).
5Keys for
additional functions:
Function:
“Menu/OK” Open the user menu and confirm the current selection.
When the rotary selector is turned simultaneously: change setting.
“Clock time” Set the time.
“Date” Set the date.
“Flow/returntemperature” Set the room temperature.
“Info” Open the Info menu (to view values).
“Back” Go back one step or one menu item.
In automatic mode the LED for the display of the current operating mode (“day mode” or “night mode”) also
lights up in addition to the LED “AUT”. Exception: with boilers with UBA1.x only the LED “AUT” lights up.
The “DHW” LED can also be switched off. With boilers with UBA1.x the “DHW” LED does not light up at all.
6 720 618 477-08.1RS
2
3
4
5
1

Buderus Logamatic EMS RC35 Specifications

General

Brand	Buderus
Model	Logamatic EMS RC35
Category	Controller
Language	English