Operation with the user menu
Logamatic EMS – 6 720 801 386 2011/05
32
5
5.6.1 Selecting a program
Here you can select and activate a switching program. This can be one of the pre-set (Æ Tab. 13,
page 33) standard programs or a new standard program which you have created or changed.
You can save and later select two new or modified switching programs as user defined 1 or user
defined 2.
Selecting a pre-set switching program:
1. Hold down the button and turn the rotary selector to select and activate a switching program.
2. Press to return to the list of options.
3. To view the selected program as a graph, select display curr. prog. (Æ page 34) or press
several times to return to the standard display.
Creating a new program:
B Select new programme.
The enter switch point menu item (Æ page 35) opens automatically for you to create your
program.
If the heating system is equipped with a remote programmer (e.g. RC2x Æ page 27)
and if the RC2x remote programmer was produced from 2006 onwards, the User
defined 2 program can also be used on the remote programmer.
To Next Page
Loading...
Need help?
General
