Setup report
Logamatic EMS – 6 720 801 386 2011/05
54
8
8 Setup report
The setup report is to be completed by your heating contractor during commissioning and is for your
information.
Allocation of heating circuits:
Area of dwelling (examples:
ground floor, granny flat)
Remote programmer
(RC35, RC2x, RC20/RF,
none
1)
)
1) In the setting 'none' the heating circuit can be set via RC35, but it does not belong to the so-called RC35
heating circuits (room temperatures can be set separately with this
Heating circuit 1
Heating circuit 2
2)
2) Not available with some boilers.
Heating circuit 3
2)
Heating circuit 4
2)
Table 16 Allocation of heating circuits
To Next Page
Loading...
