4 Disable "DHCP" and enter the desired IP address and subnet mask.
5 Under "Network Settings", enter the default gateway and DNS server addresses. If no changes are necessaries,
keep them as is.
6 Click OK.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize IP address settings with the function button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
109
To Next Page
Loading...