Chapter 9 Utilities
NAS Navigator2 for Windows
NAS Navigator2 is a utility that makes it easy to display Settings, change the TeraStation's IP address, or check its
hard drive. If you installed the TeraStation with the TeraNavigator CD, NAS Navigator2 was installed automatically.
Double-click the icon to start NAS Navigator2.
Click your TeraStation's icon to open a share on the TeraStation and display:
• Total capacity
• Capacity in use
• IP address
• Workgroup
• Subnet mask
• Default gateway
• MAC address
• Firmware version
110
To Next Page
Loading...