Deleting ECG Records
Management of the ECG record is performed within the sub directory of stored ECGs. The desired record must be
selected in order to view, print, edit or add demographics, or erase the record.
An ECG may be stored in the directory but have a “deleted status” (indicated by “√” in the column under deleted but
in the same row as the name). The directory saves records marked for deletion in the event that the record needs to
be reviewed or printed at a later time.
NOTE: Records are automatically marked for deletion based on the delete rule
configuration.
Stored ECGs will remain in the directory until the memory becomes full. Only those records that have been marked
for deletion will be removed when necessary to store a newly acquired ECG.
Erasing ECGs from the Directory
1. Select from the real-time display, followed by Directory.
2. Navigate to the desired patient record and select. All acquired ECGs for that patient will display.
3. Select ERASE ALL to erase all of the ECGs in the selected patient record, or
4. Select the desired ECG from the patient record followed by ERASE.
Printing the ECG Directory
1. Selecting Print from the bottom of the ECG directory display will generate a printout of the entire ECG
directory (up to 200 records; 40 records per page). Use Stop to stop printing.
2. Select Done to return to the Patient Demographics page; select Done again to return to the real-time
display.
ECG Orders
The ECG Orders (MWL) directory saves up to 256 ECG pending orders. Orders are displayed with name, ID,
patient location, patient room number, and date/time of order.
The Orders menu allows the user to download or print orders, as well as load a query for a certain location in the
facility. Sort, navigate and/or search ECG Orders in the same manner as the ECG Directory.
NOTE: Each time orders are downloaded the ELI 280 will automatically refresh the orders list. Orders
that have been executed, canceled or deleted will be automatically eliminated.
To Next Page
Loading...