SYSTEM SETTINGS
Device Passwords
The device’s Administrator password controls several functions and should be created and secured with care. Log
the Administrator password in a location where it can be accessed during an emergency as well as in a backup
location in case the primary location is compromised. The ELI 280 is preset with the case-sensitive Administrator
password “admin.” To change the Administrator password, see Setting Passwords.
The Administrator password enables:
a. Access to the Configuration menu which controls all other passwords.
b. Creation of a new password that can be required to access the Set Password function.
c. Creation of a technician-level password that can be required to access the ECG or MWL directories.
Setting Device Passwords
To set or change the ELI 280’s Administrator and Technician passwords:
1. Select from the real-time display.
2. Select Advanced followed by Passwords. (A password is required to enter Advanced settings.)
3. Touch the appropriate password field and use the touchscreen keyboard to enter the new password. Retype
the new password in the appropriate Confirm field.
4. Select Done to save and return to the Configuration menu, or Cancel to return without saving.
NOTE: Factory preset password is “admin”.
NOTE: Passwords are case sensitive.
NOTE: Technician password allows for entry into the ECG or MWL directories only if selected.
To Next Page
Loading...