SYSTEM SETTINGS
WLAN MAC
This indicator allows the user to see the Wireless Local Area Network MAC address.
Bar Code Scanner
This indicator allows the user to see if a bar code scanner can be used with the device.
Battery Voltage
This indicator allows the user to see the ELI 280’s current battery voltage.
Security
This indicator allows the user to see if the Security features are enabled:
Network User Authentication
User Roles
Encryption of Stored Data
Patient Demographic Query
This indicator allows users to query an EMR for patient demographic information.
Configuration Settings: Modem
Telephone Number
This control allows the user to set the telephone number for internal modem transmission to another unit or to an
E-Scribe system. The utility can accommodate up to 45 alphanumeric characters.
NOTE: Some systems may require the system to dial a 9 to get an outside line. Some systems may require
the system to wait for an additional dial tone. In this case use the letter W. See below example.
EXAMPLE: 9W14145554321
To insert a pause use a comma (,).
To change tone dialing to pulse dialing, use the letter P.
EXAMPLE: P14145554321
(If necessary, use both the letter W and the letter P in the same phone number.)
To Next Page
Loading...