SYSTEM SETTINGS
70
Configuration Settings: System
Follow these steps to change the ELI 280 system settings:
1. Select from the real-time display. (Enter password if required.)
2. Select Advanced, followed by System. (A password is required to enter Advanced settings.)
3. Make the appropriate configuration changes.
4. Select Done to save and return to the Configuration menu, or select Cancel to return without saving
Language
There are several languages available on the electrocardiograph.
CAUTION: Function labels are immediately translated upon selecting a new language and exiting
the configuration screen.
Volume
This control sets the loudness when a key on the touchscreen keyboard is pressed. Available settings are Off, Low
and High.
ID Format
This control allows the user to define the format for the patient demographic information field prompts. There are
three available formats: short, long and custom. A Custom ID format can be downloaded from ELI Link or an
E-S cribe system.
The short format contains the patient’s last name, patient’s first name, ID number, birthdate, age and sex. The device
automatically calculates the patient’s age when the birthdate is entered.
The long format contains the patient's first name, patient’s last name, ID number, age, height, weight, sex, race,
medications, location, room, and comment fields.
Unites for Height
This selection allows the user to set the units of measure to inches (in) or centimeters (cm).
Units for Weight
This selection allows the user to set the units of measure to either pounds (lb) or kilograms (kg).
To Next Page
Loading...