Burdick ELI 280 - Maintenance and Troubleshooting; System Troubleshooting Chart; ECG Troubleshooting Chart

SYSTEM SETTINGS
79
WEP Key
This utility allows the IT professional to enter the WEP key number; valid range is 1-4.
WEP Key ID
This utility allows the IT professional to enter the 128-bit WEP Key ID value (26 digits in 13 sets of two digits).
WPA-PSK
WPA (Wi-Fi Protected Access) PSK (Pre-Shared Key) security allows for implementation of the “personal mode”
of WPA. This mode of encryption employs Temporal Key Integrity Protocol (TKIP) which dynamically changes
keys as the system is used.
WPA-LEAP
Cisco® LEAP (Light Extensible Authorization Protocol) enables use of the device with wireless networks
employing the LEAP encryption protocol.
LEAP User Name
The LEAP user name can be up to 32 characters in length.
LEAP Password
The LEAP password can contain up to 32 characters.
WPA2-PEAP
Select this mode if the WLAN uses Protected Extensible Authentication Protocol.
PEAP UserName
The PEAP username can contain up to 63 characters.
PEAP Password
The PEAP password and contain be up to 63 characters.
WPA2-EAP-TLS
Select this mode when the WLAN uses EAP-TLS and client-side X.509 certificates to authenticate devices. Insert a
USB flash memory stick into the back of the ELI 280 that contains the X.509 certificate. Touch the Certificates
button to enter the Select Certificates screen. Select the appropriate certificates for the Root Certificate File, Private
Key File, and Client Certificate File fields. Touch the Load Certificates button to download the certificates.
RADIUS UserName
The username can contain up to 64 characters.
PEM Pass Phrase
The password can contain up to 64 characters.