Burkert 8041 - Standards and Directives; Conformity to the Pressure Equipment Directive; 6.2.2. UL-Certification

11
Technical data
6.2. Standards and directives
The device complies with the relevant EU harmonisation leg-
islation. In addition, the device also complies with the require-
ments of the laws of the United Kingdom.
The harmonised standards that have been applied for the con-
formity assessment procedure are listed in the current version of
the EU Declaration of Conformity/UK Declaration of Conformity.
6.2.1. Conformity to the Pressure Equipment
Directive
→ Make sure the device materials are compatible with the uid.
→ Make sure the pipe DN is adapted for the device.
The device conforms to Article 4, Paragraph1 of the Pressure
Equipment Directive 2014/68/EU under the following conditions:
• Device used on a pipe (PS=maximum admissible pressure in
bar; DN=nominal diameter of the pipe in mm)
Type of uid Conditions
Fluid group1, Article4,
Paragraph1.c.i
DN≤25
Fluid group2, Article4,
Paragraph1.c.i
DN≤32
or PSxDN≤1000
Fluid group1, Article4,
Paragraph1.c.ii
DN≤25
or PSxDN≤2000
Fluid group2, Article4,
Paragraph1.c.ii
DN≤200
or PS≤10
or PSxDN≤5000
6.2.2. UL-Certication
The devices with variable key PU01 or PU02 are UL-certied
products and comply also with the following standards:
• UL61010-1
• CAN/CSA-C22.2 n°61010-1
Identication
on the device
Certication Variable key
UL recognized PU01
Measuring
Equipment
EXXXXXX
®
UL listed PU02
english
Type 8041