Burkert 8041 - Setting the Parameters of the Relay Output

42
Adjustment and commissioning
9.9. Setting the parameters of the relay output
The Fig.33 shows the behaviour of the relay output depending on the parameter settings and the measured velocity.
2 s 2 s
2 s
t
m/s
High threshold
Low threshold
Relay
activated
deactivated
activated
deactivated
activated
deactivated
activated
deactivated
activated
deactivated
activated
deactivated
activated
deactivated
activated
deactivated
NO-wired relay
NC-wired relay
NO-wired relay
NC-wired relay
NO-wired relay
NC-wired relay
NO-wired relay
NC-wired relay
Switching time-out = 0 s
Switching time-out = 0 s
Switching time-out = 2 s
Switching time-out = 2 s
Hysteresis switching
Window switching
Connection of the relay output
Fig.33:
Behaviouroftherelayoutputdependingontheparametersettingsandthemeasuredvelocity
english
Type 8041