BWT COVERDECK AX-IN - Page 4

PROTECTION & SAFETY
4 2020/11 - Version: B -
Code : 34561
5.1. Initialisation of the printed circuit board ............................................................................... 21
5.2. Validation of the direction of rotation of the axle .................................................................. 21
5.3. Programming the ends of travel .......................................................................................... 21
6. Wiring diagram ................................................................................................. 22
SEPARATING PIT WALL........................................................................................... 23
1. Product description .......................................................................................... 23
2. Mounting the flanges - Coverdeck .................................................................. 23
3. Assembling the separating pit wall ................................................................. 25
3.1. Straight wall ......................................................................................................................... 25
3.2. Trapezoïdal ......................................................................................................................... 25
4. Putting the separating pit wall in position ...................................................... 26
ASSEMBLY OF THE COVER APRON ...................................................................... 27
1. Preparation prior to assembly ......................................................................... 27
2. Assembly of the slat apron .............................................................................. 27
2.1. Assembly of cover apron, slats finished with plugs .............................................................. 27
2.2. Assembly of the cover apron, slats finished with silicon ...................................................... 28
2.3. Assembly of the complete cover .......................................................................................... 28
2.4. Attach the slat apron to the axle .......................................................................................... 28
2.5. Retainers for pools with step pieces (option) ....................................................................... 29
2.6. PVC slats: Guide weights for overflow pools (option) .......................................................... 29
2.7. Cover apron safety fasteners .............................................................................................. 30
2.7.1. Wall mounted safety fastener ................................................................................................. 30
2.7.2. Sub-coping mounted safety fastener ..................................................................................... 31
2.8. Adjustable strap at the end of the pool ................................................................................ 32
2.8.1. Strap configurations ........................................................................................................... 32
2.8.2. Stainless steel, fixed hasp fastener ........................................................................................ 33
2.8.3. Stainless steel, collapsible hasp fastener ............................................................................... 33
2.8.4. Attaching the strap to the hasp ............................................................................................... 33
2.8.5. Hasp fastener for overflow and buffer tank ............................................................................ 34
2.8.6. Installation of the lateral fasteners .......................................................................................... 34
2.8.7. Recommendations concerning the installation of hasps ....................................................... 35
BEAM ......................................................................................................................... 36
1. Beam and counterweight ................................................................................. 36
1.1. Coverdeck beam mounting unit with sub-coping sealing plate ............................................ 36
2. High water level bracket ................................................................................... 38