EasyManua.ls Logo

BYD Seal 2024 - Page 102

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
and wait until the temperature drops
before operating.
REMINDER
If the meter drops to 0, the
battery must be recharged. If it is
not recharged within seven days,
the battery may suffer permanent
damage. Such damage is not
covered by BYD warranty terms.
Driving range depends on many
factors, such as the vehicle's
available power, vehicle age
(current battery life), weather,
temperature, road conditions and
driving habits. Compared with
under normal temperatures, the
pure-electric driving range is
somewhat reduced and power
performance will also be affected
in low or high temperature
environments.
Saving Energy and
Extending Vehicle Service
Life
Saving energy is simple and easy, and
it helps prolong the vehicle's service
life.
Here are some tips for saving energy
and repair cost:
1. Regenerative braking setting:
The vehicle is provided with an
energy recovery function. To set the
energy recovery intensity, go to the
infotainment touchscreen →
New EnergyEnergy Manager. In
high energy recovery mode, more
energy is recovered during vehicle
braking and coasting. Please set to suit
to your driving habits.
2. Maintaining constant speed:
Constant speeds save energy.
Sudden acceleration, sharp turns
and emergency braking increase
consumption.
Keep a constant speed according to
traffic conditions. Additional energy is
consumed each time the accelerator is
pushed.
Acceleration should be gradual. Avoid
sudden startup, acceleration, or
deceleration.
Prevent emergency braking, and
subsequent brake wear, by keeping
an appropriate distance from vehicles
ahead, and paying attention to traffic
lights.
Congested roads increase energy
consumption.
Keep moderate speeds in motorways.
The higher the speed, the higher
the consumption. Maintaining vehicle
speed within the economical speed
range can save power.
3. Reducing load:
Energy consumption is higher when air
conditioning is used. Turn off the A/C
to reduce power consumption. When
outside temperatures are moderate,
use fresh air mode.
Do not overload the vehicle
unnecessarily. Excessive weights will
add the load of vehicle, increasing
energy consumption.
4. Other tips:
Make sure tire pressure is correct.
Low tire pressure increases energy
consumption and wear.
Keep front wheels properly aligned,
avoid driving into curbstones, and
drive slowly in rough terrain.
Misalignment of the front wheels not
only increases tire wear, but also
101
04
USING AND DRIVING

Table of Contents

Related product manuals