EasyManua.ls Logo

BYD Seal 2024 - Head-Up Display (Hud)

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Targets that may not be responded
include, but are not limited to,
pedestrians and animals.
The environment contains
electromagnetic interference or
other influences.
Vibration or collision influence on
sensor calibration of BSD's rear corner
mmWave radars can degrade system
performance. If this is detected,
contact a BYD authorized dealer or
service provider.
WARNING
Blind spot assist serves as a driver
assistance function only, so the
driver must be fully responsible
for driving safety.
Influence of weather, road
conditions, and other factors may
cause blind spot assist to fail.
Use blind spot assist based on
your needs, traffic, and road
conditions.
Head-up Display (HUD)*
Head-up display (HUD): The head-up
display (HUD) function projects important
information, including vehicle speed,
speed limit, ACC, lane departure, BSD,
etc., into the driver's field of view on
the front windshield. It improves driving
safety by preventing the driver from
frequently changing the focus of eyes.
How to Use
To enable or disable HUD, go to the
infotainment touchscreen →
Vehicle.
By factory default, HUD is on and the
image is displayed. When it is disabled,
no HUD image is displayed. The system
defaults to the previous settings when
the vehicle starts.
Height adjusting: adjust the height
of HUD virtual image in between
-10 and 10. A total of 21 values are
available, and the default value is 0.
Brightness adjusting: adjust the
brightness of HUD virtual image in
between 1 and 11. A total of 11 values
are available, and the default value is
6.
Whirling adjusting: adjust the angle
of HUD virtual image. A total of 11
values are available, and the default
value is 0°.
Mode setting: select Classic (default
setting) or Snow mode according to
the environment of the vehicle.
Settings optional for display: Safe
driving assistance can be selected
and is enabled by default.
CAUTION
Make sure that the head-up
display is unobstructed.
Wipe the dust on the dust-proof
board with soft cotton cloth or
paper towel.
No water or other liquid is allowed
to flow into the opening of the
head-up display.
133
04
USING AND DRIVING

Table of Contents

Related product manuals