EasyManua.ls Logo

BYD Seal 2024 - Discharging Device

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can tap the Smart Charging
setting icon④ to turn off the charging
connector connected alert and power-
off alert in the Reservation charging.
REMINDER
The instant charging option on
the reminder screen is valid for
the current reservation only. To
cancel all reservations, toggle
charging reservation off on the
corresponding setting screen.
The reservation charging function
is only dedicated for AC charging
piles provided by BYD. If you need
to use this function via a public
charging facility, please make sure
that the facility supports vehicle-
terminal reservation.
In the event of low battery,
the vehicle is charged to the
minimum level before scheduled
charging begins. In this process,
the infotainment system still
gives reminder messages for
power-off and charging connector
connection, and a related
message is displayed at the lower
part of the instrument cluster.
The schedule setting is invalid
for DC charging. Charging begins
immediately after a DC charging
connector is connected.
CAUTION
The scheduled charging function
is only developed for slow AC
charging equipment supplied
by BYD. Please disable this
function when using slow AC
charging equipment that is not
certified by BYD. Otherwise,
scheduled or immediate charging
may fail due to no response
from the equipment, resulting in
insufficient battery power or even
lack of electricity.
Intelligent Charging
If the high-voltage battery has
sufficient power, it will charge the
low-voltage battery when the latter is
detected to be low.
REMINDER
When the vehicle is stored for a
long time, the intelligent charging
function may be activated, which
is normal and not a vehicle failure.
Power for intelligent charging
comes from the high-voltage
battery pack, so it is normal that
an SOC decrease is noticed when
the vehicle is powered on.
Discharging Device
This vehicle features a vehicle to load
(V2L) function.
WARNING
Do not touch any metal terminal
of the discharging socket or
the vehicle charge port during
discharging.
90

Table of Contents

Related product manuals