Infotainment
System
Infotainment Control
Panel
When the ignition is on, the initial screen
is displayed for several seconds and the
infotainment system starts to work. To
better experience infotainment functions,
such as intelligent voice control, apps and
video call, the system must be used after
network connection.
① Infotainment touchscreen
② Scroll button
●
When the infotainment system is
already started, press the button to
turn off the infotainment system, press
again to turn it on, and press and hold
the button for three seconds to restart
the infotainment system.
●
When the infotainment touchscreen is
on, scroll up (forward direction) to turn
volume up or down (rear direction)
to turn volume down. Volume ranges
from 0 to 39. A mute icon is displayed
when the volume is 0.
Reset to factory settings
●
If you are sure to reset to factory
settings, infotainment system will be
reset to the factory settings.
●
During the process, do not touch any
infotainment button or turn off the
power supply, or errors may occur.
●
The process takes two to five
minutes, please wait patiently.
WARNING
●
Do not use a high-power inverter
in the vehicle, as this may cause
infotainment system malfunction.
●
Do not format or root the device,
as this may cause infotainment
system or vehicle malfunction.
●
In driving, please use the
infotainment system in landscape
mode wherever possible for your
safety.
CAUTION
●
To prevent damage to the
touchscreen:
●
Touch the screen gently. If there
is no response, remove your
finger from the screen, then
touch it again.
●
Clean the screen with a soft
damp cloth. Do not use any
cleaning product.
●
Using the touchscreen
●
When the screen temperature is
low, the image displayed may be
darker or the system may work
slightly slower than normal.
●
The screen may be dark or
difficult to see when you are
wearing sunglasses. In that case,
change the viewing angle or take
off the sunglasses.
●
Touchscreen buttons that are
grayed out cannot be operated.
152
To Next Page
Loading...
