BYD Seal 2024 - Instrument Cluster Indicators

CAUTION
●
During occasional communication
delays in the instrument cluster
system, the instrument cluster
may automatically switch to
simple mode for safe driving. In
this mode, the instrument cluster
continues to display driving
related information normally
without affecting normal vehicle
travel. After the system becomes
normal, the instrument cluster
may automatically exit the simple
mode. If it does not, try the
following actions to switch back
to normal mode:
1.
Press and hold the scroll button
on auxiliary dashboard for
three seconds to restart the
instrument cluster information
display system.
2. While vehicle safety is ensured,
operate the vehicle power
CAUTION
switch to turn off the vehicle
and then turn the ignition on.
●
If the instrument cluster
remains in simple mode after
those actions have been
taken, promptly contact a BYD
authorized dealer or service
provider for inspection.
●
The image of the instrument
cluster view is for reference only
and is subject to actual factory
configuration.
Instrument Cluster
Indicators
Indicators/Warning Lights
Turn signal indicator Position light indicator
High beam indicator HMA indicator*
37
02
INSTRUMENT CLUSTER