BYD Seal 2024 - Folding Rear Seats; Rear Seat Head Supports

Folding Rear Seats
Pull up the folding release clasp on the
seatback to fold the rear seatback.
CAUTION
●
Fold or unfold the rear seats
at a moderate speed. Avoid
quickly lowering or pulling up
seatbacks to prevent damage to
or malfunction of rear seats and
the seat belts.
●
Ensure that the seat belts are not
stuck between the seats when
folding, or the seats and belts may
be damged.
Rear Seat Head Supports
Lifting head supports
Lift the head support to a proper position,
and release it after hearing a locking
sound.
Lowering head supports
Press and hold the head support
adjustment button, lower the head
support to a proper position, slightly lift
the head support and release the button
after hearing a locking sound.
Removing head supports
Press and hold the head support
adjustment button, remove the head
support and release the button.
Installing head supports
Insert the head support post into
the bushing with the grooves facing
forward. Press and hold the head support
adjustment button, lower the head
support to a proper position, slightly lift
the head support and release the button
after hearing a locking sound.
REMINDER
●
To avoid any injury to heads and
shoulders of the occupants, align
the occupant's ear tip line with
the center of the head support
when adjusting the head support
height.
●
After the adjustment, press down
the head support to make sure
that it is locked.
●
Do not drive the vehicle without
head supports.
●
Do not attach any objects to the
head support post.
64