Closing the Hood
1.
To close the hood, lower it to a proper
height and push it slightly until it
partially locks. Then press slowly and
evenly on the blue area as shown in
the illustration with both hands to fully
lock it. Keep your hands at a certain
distance and do not press the edges.
2. After closing the hood, check whether
the latch is securely locked.
REMINDER
●
Ensure that the hood is closed
and locked firmly. Otherwise, the
hood may suddenly open during
driving, resulting in an accident.
●
Do not force down the hood.
●
Do not close the hood with one
hand, as this may concentrate
the force in one area and cause
damage to the hood.
REMINDER
●
Do not press the front edge of the
hood to prevent damage to the
vehicle.
Cooling System
●
It is required that the liquid level
should be between the Maximum(MAX)
and Minimum(MIN) marker lines of the
expansion tank.
●
The coolant must always be of the
same specification as the original,
without adding any mixture. Different
brands and types of coolant should not
be mixed.
●
Refill coolant to the MAX line if the
level is below the MIN line. Check the
cooling system for leakage.
REMINDER
●
Opening the coolant expansion
tank when the motor has not
yet fully cooled down may cause
coolant to squirt out, resulting in
severe burns.
CAUTION
●
Do not add any rust inhibitor
or other additives to the cooling
system. This is because these
184
To Next Page
Loading...
