●
Instrument cluster: Confirm that
the maintenance indicator and the
speedometer work normally.
●
Brakes: In a safe area, verify that the
vehicle maintains a straight direction.
●
Other abnormalities: Check for loose
parts, leaks, and unusual noises.
If everything is OK, just enjoy your
driving.
Remote Start*
Remote Start
1. Press and hold the remote start/stop
button on the electronic smart key for
two seconds to start the vehicle. After
it is started, turn signals will flash three
times.
2.
If there is no valid operation within 10
minutes after remote start, the vehicle
stops and powers off, and turn signals
flash twice.
3. Press and hold the remote start/stop
button on the electronic smart key for
two seconds. The vehicle powers off
and turn signals flash twice.
Gear Shift Controls
●
The gear position of the gear shift
controls is marked on the lever.
●
"P": Park, press this button to park the
vehicle and the parking indicator will
light up. Press the brake pedal to start
the vehicle, you may shift from Park to
another gear.
CAUTION
●
To prevent damage, press the "P"
button only after the vehicle has
completely stopped.
●
"R": Reverse, used only when the
vehicle has come to a complete stop.
●
"N": Neutral, used for temporary stop.
Under all circumstances, always shift
to Park before the driver gets out.
●
"D": Drive, shift to Drive gear to drive
the vehicle normally.
●
If the shift is successful, the
lever returns to its middle position
automatically after it is released.
●
Turn the ignition on in "OK" button
before shifting into Drive.
●
Shifting out of Park or into Drive
requires pressing the brake pedal. See
more details in the
P37
.
●
To prevent unintended vehicle
movement, press the "P" button after
the vehicle has stopped completely.
The electronic parking brake (EPB) is
automatically applied and the EPB
indicator lights up.
108
To Next Page
Loading...
