BYD Seal 2024 - Tire Pressure Monitoring

Tire Pressure Monitoring
Direct Tire Pressure Monitoring System
*
●
The direct tire pressure monitoring
system is an auxiliary system that
monitors tire pressure in real time to
improve vehicle safety and comfort
and reduce tire wear and energy
consumption due to insufficient tire
pressure.
●
You can access the instrument cluster
menu by pressing the
button on the
steering wheel, navigate to the driving
information bar by pressing the
and buttons, and then select the
tyre pressure display screen using the
scroll button.
Tire pressure system alarm
●
When the pressure of any tire is lower
than 80% of the standard tire pressure
(taking temperature into account) and
the system is running, the tire pressure
fault warning light lights up and the
tire pressure value turns yellow, it is
recommended to check for slow air
leakage and inflate the tire to the
correct pressure value.
●
When the temperature of any tire
is above 85°C for three consecutive
minutes, the tire pressure system
gives a high temperature alarm,
and the temperature value of the
corresponding tire turns yellow, it
is recommended to stop the vehicle
and wait for the tire temperature to
decrease before further driving.
●
When one or more tires leak air quickly
and the system is running, the tire
pressure fault warning light flashes
constantly and the tire pressure value
turns red. In that case, promptly stop
the vehicle and replace tires or contact
a BYD authorized dealer or service
provider.
●
When the system is running, if a fault
occurs, the tire pressure fault warning
light is solid on after flashing, and
the message "No Signal" or "Please
check TPMS" is displayed on the
instrument cluster. In that case, check
the tire pressure monitoring module,
and check for any surrounding
electromagnetic source nearby. If the
alarm persists for a long time, contact
a BYD authorized dealer or service
provider.
CAUTION
●
The running time of the tire
pressure monitoring module is
related to the daily travel distance
and other factors.
●
The monitoring module regularly
transmits tire pressure and
other information to the display.
Therefore, if the tire pressure
drops suddenly or there is a flat
tire, the monitoring module will
not transmit data to the display
until the next monitoring. In this
case, the vehicle may be out
of control. If there is a flat tire
and monitoring fails to inform,
or if you feel that there are
some tire problems, stop driving
immediately instead of waiting for
the display to signal an alarm.
●
Incorrectly installed monitoring
module affects the air tightness of
the tire. It is recommended that
the installation and replacement
of the pressure monitoring
module be carried out by
professional technicians of a
BYD authorized dealer or service
provider in accordance with the
requirements of the installation
manual.
●
Since tire pressure varies with
regional temperatures, inflate
134