BYD Seal 2024 - Switches; Light Switches

REMINDER
●
Never adjust the steering wheel
while driving, as this is under risk
of impaired vehicle control, which
can lead to accidents.
●
After adjusting the steering wheel,
move it up and down to verify that
it is securely locked.
Steering Assist Mode Settings
●
The steering feel varies from person to
person, and so do the evaluation and
needs for this feel.
●
You can select Comfortable or Sport
in infotainment touchscreen →
→ Vehicle → Intelligent Chassis →
Steering Assist Mode.
REMINDER
●
When the vehicle is running at a
high speed, if the steering wheel
feels light, set the steering assist
mode to "Sports" mode.
Switches
Light Switches
Set the light switch to
to turn off all
lights except for daytime running lights.
Auto lights
Set the light switch to
. The body
control module captures the brightness
data from the light intensity sensor to
automatically turn the position lights and
low beam on or off.
REMINDER
●
The light intensity sensor is
located on the top of the
windshield. Do not block the
sensor or let anything splash on it.
Position lights
Set the light switch to
to turn on
the front and rear position lights and the
license plate light.
Low beam
Set the light switch to
to turn on the
low beam.
68