BYD Seal 2024 - Navigation Bar; OTA Upgrade

CAUTION
●
The touchscreen interface shown
here is for reference only, please
subject to the actual vehicle.
●
It is recommended to contact a
BYD authorized dealer or service
provider in the event of a failure.
Navigation Bar
: returns to the previous page or exits
the program.
: returns to the homepage.
: shows recently opened applications.
: switches between landscape and
portrait touchscreen modes.
: splits screen if applications support.
: enables screen saver.
: goes to vehicle setting screen.
●
The customized map* allows for
destination searching, route planning,
navigation (online or offline), real-time
traffic conditions, voice broadcast,
and route recommendation. You can
also add home, work and favorite
destinations.
●
Most interactive controls are on the
left side of the map for searching for
nearby charging piles, parking lots,
and other interested places easily.
Gestures and Responses
Gestures and associated system
responses are:
●
Tapping: opens applications, selects
functions, clicks icons on the
touchscreen, or types characters.
●
Dragging: touches and drags an icon,
thumbnail, or preview to the target
location and releases to change its
location.
●
Swiping: operational on homepage
and app screens.
●
Double-tapping: zooms in an image.
Double-tap again to return.
●
Spreading/Pinching: zooms in or out
an image with two fingers.
OTA Upgrade
●
The vehicle software can be
upgraded. You can go to
the infotainment touchscreen →
→System→Version→Software
Version→Upgrade to upgrade the
vehicle system and get the latest
vehicle functions.
●
When a vehicle software needs
to be updated, there will be a
prompt message. You can upgrade it
immediately, schedule an upgrade, or
upgrade it by mobile phone according
to your use of the vehicle.
CAUTION
●
Do not move the vehicle during
the OTA upgrade.
●
Before the OTA upgrade, make
sure the vehicle is parked in a safe
area with the gear in "P", and the
mobile communication network
connection is normal.
●
Make sure your vehicle is fully
charged before the OTA upgrade.
●
Do not install any third-party
devices at the vehicle's OBD port
before or during the OTA upgrade.
●
The vehicle cannot be charged
or discharged during an upgrade.
153
05
IN-VEHICLE DEVICES