EasyManua.ls Logo

BYD Seal 2024 - Driving Range Display

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No.
Charge Port Anti-
theft Lock Status
Door Anti-theft
Lock Status
Charging Connector
Removable or Not
1 Activate Locking No
2 Activate Unlocking Yes
3 Deactivate Locking Yes
4 Deactivate Unlocking Yes
WARNING
The connector needs to be pulled
out within 30s after the charge
port electric lock is unlocked.
Otherwise, the electric lock will
lock again.
Emergency Unlocking of the Charge
Port
When charging connector cannot be
unplugged due to failure of the anti-
theft lock, unlock the charge port
manually.
Charge port lock dragline
1. Open the trunk. There is an emergency
cable for the charging connector on
the right side panel inside the trunk.
2.
Unlock the charging connector by
unlocking the emergency cable latch
and pulling the emergency cable.
3. Reset the emergency cable latch after
the unlocking is completed.
REMINDER
If the above functions are
abnormal or fail, contact a
BYD authorized dealer or service
provider.
Driving Range Display
The "Driving Range Display Mode" can
be set to improve driving experience.
The default setting is "Standard”.
You can personalize it by Infotainment
touchscreen
→ New energy → Energy
management.
Standard mode: displays the driving
range based on the result of
comprehensive working condition test.
Dynamic mode: displays the estimated
driving range based on the available
battery power and current average
energy consumption.
The set driving range display mode is
memorized by the system. When the
vehicle is powered off and then on,
the display mode set last time will be
maintained.
REMINDER
When the Dynamic range display
mode is set:
93
04
USING AND DRIVING

Table of Contents

Related product manuals