●
For easy exiting, this feature also
works when the vehicle power is
switched from "START" to "STOP"
and the driver's door is opened.
●
Automatic forward
●
When the vehicle power is switched
from "STOP" to "START" and the
driver's door is closed, the seat will
automatically move forward to the
position before the last power-off
if no horizontal position adjustment
is performed after the auto-back
feature is triggered upon the last
power-off.
●
If no horizontal position adjustment
is performed after the auto-back
feature is triggered for easy exiting,
the seat will automatically move
forward after the driver's door is
closed.
●
User settings
●
To enable or disable the automatic
driver seat, go to infotainment
touchscreen →
→ Vehicle →
Comfortable Use.
●
The automatic driver seat function
can be interrupted by closing the
driver's door while the seat is moving
backward or by opening the driver's
door while the seat is moving
forward.
Heating and Ventilation System*
●
To enable or disable the heating
& ventilation function, go to
infotainment touchscreen →
→
A/C → Seat Operation.
●
Tap "Drop-down" on the homepage
of the infotainment system to operate
the seat heating and ventilation setting
buttons.
Heating system adjustment
●
Seat heating: Control the operation
mode of the heating pad by using
the seat heating switch. The heating
function has two modes.
●
After each power-on, the driver's
seat remembers the last mode,
and the initial heating state of the
passenger's seat is Off.
●
Press the switch to select the
operation mode of the seat heater in
the 1st gear or 2nd gear.
●
Press the OFF gear to deactivate the
heating function.
Ventilation adjustment
●
Seat ventilation: Control the operation
mode of the ventilation fan by using
the seat ventilation switch. Seat
ventilation has two modes.
●
After each power-on, the driver's
seat remembers the last mode, and
the initial ventilation state of the
passenger's seat is Off.
●
Press the switch to select the
operation mode of the seat
ventilation in the 1st gear or 2nd
gear.
●
Press the OFF gear to deactivate the
ventilation function.
Ventilation and heating functions
cannot be turned on at the same time.
●
Press the ventilation switch to make
the ventilator work; if the heating
switch is then pressed, the ventilator
will stop and the heater will start to
work.
●
Press the heating switch to make the
heater work; if the ventilation switch is
then pressed, the heater will stop and
the ventilator will start to work.
63
03
CONTROLLER OPERATION
To Next Page
Loading...
