Traffic Sign Recognition
(TSR)
The traffic sign recognition (TSR) system
identifies speed limit signs through the
multi-purpose camera and map*, displays
such signs on the current road on the
instrument cluster, and sends alarm
messages to the driver when vehicle
speed exceeds the detected limit.
How to Use
●
Enable or disable TSR in Vehicle
Settings →
→ ADAS → Driving
Assist.
●
When the TSR system identifies the
current traffic sign,
is displayed
on the instrument cluster.
●
When TSR cannot identify whether the
recognized speed limit value applies
to the lane,
is displayed on the
instrument cluster.
●
When the TSR system experiences
reduced performance,
is
displayed on the instrument cluster.
●
When the TSR system has a reduced
performance and cannot identify
whether the recognized speed limit
value applies to the lane,
is
displayed on the instrument cluster.
●
If the TSR system malfunctions,
is
displayed on the instrument cluster.
●
If you disable TSR manually by
pressing buttons,
is displayed on
the instrument cluster.
●
The specific numbers displayed in the
indicators depend on the actual traffic
signs.
●
When no available speed limit value
is identified,
is displayed on the
instrument cluster.
Precautions
●
The traffic sign recognition system can
identify speed limit signs only, and will
not control speed. The control over
the vehicle always vests in the driver.
Please drive properly.
●
Weight limit signs not in standard
size as per national regulations may
mistakenly be identified as speed limit
signs.
●
If a speed limit sign is unclear,
distorted, inclined, reflective, or partly
blocked or overlaid, the multi-purpose
camera may fail to or incorrectly
identify the sign.
●
TSR performance depends on weather
conditions, lighting, and sign visibility.
The system may fail to or incorrectly
identify the sign at night or sunset,
in rainy, foggy, hazy, snowy or dusty
environment, when light is coming
from the back of the vehicle, or when
there is a sudden change in lighting.
●
In case the vehicle has been
involved in a collision or the multi-
purpose camera's sensor has been
reassembled, go to a BYD authorized
dealer or service provider for sensor
calibration so as to avoid affecting
system performance.
●
If the model is available in the
European market, recognition of
traffic jams, construction zones, and
accidents ahead must rely on Internet
connection, provided that the system
supports the recognition of these
signs. It is recommended to use
the function under Wi-Fi or hotspot
connection. You can also use mobile
data on the infotainment system as
long as it is within the monthly data
limit.
125
04
USING AND DRIVING
To Next Page
Loading...
