Item Interval
Drive shaft boot Check every 24 months or 30,000 km
Ball pin and boot Check every 24 months or 30,000 km
Front and rear suspensions Check every 24 months or 30,000 km
Tire condition and inflation pressure, incl.
TPMS
Check every 24 months or 30,000 km
Tire wear (Check front and rear wheel
alignment when tire uneven wear is greater
than 2 mm)
Check during maintenance and rotate
when necessary; Under severe working
conditions, check more frequently and
rotate when necessary
EPS corrosion and foreign materials on
or ablation of connectors, including wiring
harness GND point
Check every 24 months or 30,000 km
Coolant level in expansion tank Check every 24 months or 30,000 km
Brake fluid Check every 24 months or 30,000 km
Bumps or deformation of the high-voltage
battery tray, crash bar, shield, and
explosion-proof valve*, and powertrain
leaks
Check every 24 months or 30,000 km
A/C filter*
Check every 24 months or 30,000 km. In
severe driving conditions, check every six
months and replace if necessary
Drive motor coolant
Replace the long-acting organic acid
coolant every six years or 90,000 km
Brake fluid
Check during maintenance and replace
every 24 months or 30,000 km
Gear oil in the transmission
Replace the gear oil and filter at 24 months
or 30,000 km for the first time, and every 24
months or 48,000 km afterwards
Notes: When checking Item 1, replace chassis parts in a timely manner if any abnormal
damage is found.
CAUTION
●
Brake friction pads and discs
need to be checked at different
intervals and more frequently in
severe weather conditions, such
CAUTION
as extremely cold regions like
Norway, Finland and Iceland.
175
06
MAINTENANCE
To Next Page
Loading...
