EasyManua.ls Logo

BYD Seal 2024 - Page 89

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
2. Charging
Unlock the vehicle and open the
charge port door:
Open the charge port cap and the
port door (see instructions for mode
2 charging).
Connect the vehicle port:
Plug the charging connector into the
port and make sure it is tight.
Charging settings:
For AC charging pile/box subject to
authentication, swipe the card or
scan the QR code. For details, see the
user manual for charging pile/box.
The charging connection indicator
lights up on the instrument cluster.
In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
At this point, you can schedule
charging on the infotainment
touchscreen. See
P89
for the
configuration process.
3. Stopping charging
End the charging:
Charging ends automatically when
early stop time is due or charging is
complete.
Press the unlock button on the
smart key or press the door handle
microswitch (while carrying the
smart key), then the vehicle will stop
charging.
Disconnect the charge port:
Disconnect as per the instructions in
P84
.
Close the A/C charge port cap and the
port door (see
P84
).
Store the charging equipment
properly.
If an AC charging pile/box is used,
place the charging connector in its
designated location in the charging
pile/box.
Using DC Chargers*
1. Equipment descriptions
Use the DC battery charger in public
places to charge the vehicle. Generally,
it is installed in a specific charging
station.
Equipment specifications: Please
check the instructions for the charger.
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
2. Charging
DC charging is achieved by connecting
the vehicle to a DC charging connector via
its connector.
Unlock the charge port door, then
open the port door and cap.
Connect the vehicle port:
Plug the connector into the port,
making sure it is tight.
Operate the charging equipment to
start charging.
88

Table of Contents

Related product manuals